Difference Between Steam Engine and Steam Turbine

An engine, by definition, is any device that turns energy into mechanical energy, particularly rotational mechanical energy. The heat and pressure energy of the fluid is converted into mechanical energy via a turbine.

A steam engine converts linear, reversing motion into rotating motion by using high-pressure steam to move a piston in a cylinder. High-pressure steam is used to turn a series of fins attached to a shaft in a steam turbine. The shaft rotates due to the orientation of the fin.

What is a Steam Turbine?

Steam Turbine

A steam turbine is a revolving machine that takes the steam’s pressure energy and converts it to mechanical power at the rotor shaft. The pressure of steam is reduced in a steam turbine to rotate the turbine blades. The following are the key components of a steam turbine:

  • Nozzles in a ring
  • Blades moving in a ring
  • Blade ring with fixed blades

It’s mostly utilized to generate electricity, but it’s also used to power various industrial machines and locomotives. Steam turbines can be found all over the world, and they’re used to power generators and generate electricity, as well as provide propulsion for ships, planes, and missiles. They use pressure on spinning blades to transfer heat energy in the form of evaporated water into motion.

Types of steam turbine and how it works

Condensing, pass-out condensing, and back-pressure steam turbines are the three major types of steam turbines used to create power as a by-product of process or exhaust waste.

In simple words, a steam turbine works by heating water to extremely high temperatures until it is transformed into steam using a heat source (gas, coal, nuclear, or solar). In the rotating turbine blades, the potential energy of the steam is converted to kinetic energy. Aeroplanes, trains, ships, electrical generators, pumps, gas compressors, and tanks are all powered by gas turbines.

The water is still present, but it is now in the form of steam. Water vapour is another name for this type of water, and it’s a very powerful substance. This is because as more heat is applied, more water molecules convert to vapour, and you are no longer heating them!

The type of energy is steam

Steam power is an essential source of energy in industrial society. In power plants, water is heated to steam, which is then pressured and used to drive turbines that generate electricity.

Steam’s thermal energy is transferred to mechanical energy, which is then converted to.

Steam turbine Control system

The gas turbine Control system keeps an eye on things and protects you from dangerous situations. Turbine control systems for power plants are made by companies like GE and Woodward. DS200CPCAG1A and DS200DMCBG1A are examples of GE products. The control software package is used to program, configure, trend, and analyse diagnostics on Mark VIe controllers and related systems.

What is a Steam Engine?

Steam Engine

The steam engine is a reciprocating mechanism that turns the steam’s pressure energy into reciprocating motion, which is then converted into rotational motion. The piston, cylinder, D-slide valve, connecting rod, crank, and other major components of a steam engine are listed here.

A double-acting piston cylinder makes up the steam turbine. With the help of a D-slide valve, steam is alternately fed to each side of the double-acting cylinder. In a steam engine, the piston reciprocates into the cylinder. By using a crank and connecting rod, the reciprocating action of the piston is turned into rotary motion. Old locomotives and watercraft used the steam engine.

Steam Engine vs Steam Turbine

While both a steam engine and a steam turbine employ the large latent heat of vaporization of steam to generate power, the key distinction is the greatest number of revolutions per minute that both can give. Inherent in the design of a steam-driven reciprocating piston is a limit on the number of cycles per minute it can provide.

In locomotive steam engines, double-acting pistons are used, with steam accumulating on both faces alternately. The piston is held in place by a piston rod that is attached to a crosshead.
A linkage connects the crosshead to the valve control rod. The valves control both the supply of steam and the exhaust of used steam.

Vanes made of steel are used in turbines to provide a rotating movement with the steam flow.
Three important technological advances may be identified that make steam turbines more efficient than steam engines. The three factors are the direction of steam flow, the qualities of the steel used to make turbine vanes, and the process of producing “supercritical steam.”

In comparison to the previous technology of peripheral flow, new technology for steam flow direction and flow pattern is more advanced. The greatest energy of the steam is transferred to the rotational movement of the turbine blades by introducing a direct hit of steam with blades at an angle that creates little or no back resistance.

The supercritical steam is created by pressurizing regular steam to the point where the water molecules in the steam are driven to a point where it resembles a liquid again while maintaining its gas properties; this has a higher energy efficiency than normal hot steam.

The use of high-quality steel in the manufacturing of vanes enabled these two technological breakthroughs. So, with the same amount of energy as regular steam power, it was able to run the turbines at considerably higher speeds while enduring the tremendous pressure of supercritical steam without breaking or even destroying the blades.

Small turndown ratios, which refer to the degradation of performance as steam pressure or flow rates are reduced, slow start-up times, which are used to avoid thermal shocks in thin steel blades, high capital costs, and high-quality steam necessitate feed water treatment are all disadvantages of turbines.

The fundamental disadvantage of the steam engine is its low efficiency and speed limitation.
With the emergence of tiny steam generators and by keeping the engine in an oil-free condition, newer engines may operate at significantly better efficiency, approximately 35%, extending the fluid life.

Steam engines are chosen over steam turbines for small systems since turbine efficiency is dependent on steam quality and high speed. The exhaust from steam turbines is extremely hot, resulting in low thermal efficiency.

The resurgence of steam engines is currently noticeable due to the high cost of fuel used in internal combustion engines. Steam engines are extremely effective at recovering waste energy from a variety of sources, including steam turbine exhaust. In combined cycle power plants, waste heat from steam turbines is utilized. It also allows for the waste stream to be discharged as exhaust at much lower temperatures.

Leave a Reply

Your email address will not be published.